Seward Park, King County
Creosote removal in Seward Park begins at $245. That covers the lighter grades, where the deposit is flaky or crunchy and comes away under rotary brushes. Tar-like or glazed creosote takes chemical treatment, several visits, or a rotary cutting head, and costs more. We film the flue first, so the quote is based on what is actually stuck to the walls.
Typical investment
From $245
Book an inspection
Book your $99 inspection
$99 plus tax, deducted when you approve the repair
Not sure where to start
Pick what you're seeing at your Seward Park home — we'll point you to the right fix.
What we do
The same crew, the same written quote — for Seward Park homes.
Level 1: every reachable component checked, with a Level 2 camera run added if something stays unclear
Learn more
Full-height brushing with a head chosen for clay tile or metal liner
Learn more
Photo assessment sorting surface wear from structural failure
Learn more
Video survey and flue measurements taken before ordering anything
Learn more
Flue-by-flue measurements, or the whole crown for a multi-flue hood
Learn more
Cleaning and testing of the burner, pilot assembly and igniter
Learn moreRanges shown for orientation — the exact figure is written up on-site, after the inspection.
Wood is not how people in this corner of Seattle heat. Out of 19,176 occupied homes in ZIP area 98118, which takes in Seward Park, roughly 29 told the census survey that wood was their primary heat. Creosote here is therefore rarely the product of a stove running all winter. More often it comes from the other pattern: a few slow, smoky fires a season, lit with damp wood in a cold flue and shut down early. That kind of burning leaves a thick, sticky layer, sometimes worse than a daily fire would.
Every creosote removal we do in Seward Park includes:
Smoke coming back into the room, or a smell that won't go? Book the inspection first.
Book nowCreosote starts in the woodpile. The state Ecology department's firewood advice comes down to time and a meter: split the logs, give the covered stack a full year or more, and confirm they are dry before they go in, since damp loads waste fuel and pour out smoke. Weather adds to it. In the regional climate center's account, still and clear stretches in late autumn and winter hold smoke low under an inversion, and those are the spells that bring burn bans. Smoky fires coat a flue fastest, and they can also break state law: Washington's opacity limit for chimney smoke is 20 percent, measured over six-minute spans.
On video, powdery soot, a crust and a hardened glaze look quite different; we also note the height at which the deposit stops.
Brushes for the first, power rotary tools for the second, a modifier and repeat passes for the third.
We clear the flue in stages and film it again between passes, so nothing is left hidden behind a liner joint.
You get practical notes on wood moisture, air settings and fire size, so the problem does not rebuild by next winter.
What this work is quoted at for Seward Park homes — the exact figure comes from the $99 on-site inspection, credited toward the work.
| Service | Price in Seward Park | What that covers |
|---|---|---|
| Creosote Removal | From $245 | Priced by creosote stage — glazed stage 3 is the heavy end |
| Chimney Sweep | $189–$449 | Full flue swept, Level 1 inspection included |
| Chimney Inspection | $99 plus tax | Level 1 visual; Level 2 adds a full camera scan |
| Chimney Relining | From $1,900 | Full-length stainless liner, sized to the appliance |
| Chimney Repair | From $425 | Masonry repair — brick and mortar, scoped after diagnosis |
Ranges are what these jobs are quoted at in Seward Park. The exact figure is set on site after a $99 inspection (credited toward the job if you go ahead), and you approve it before any work starts.
Seward Park is a Seattle neighborhood named for the 300-acre park on its peninsula, on the lakeshore, with homes in a ZIP code area (98118) where about six in ten housing units are detached houses and the median build year is 1968.
Seward ParkKing County, WA · 47.551, -122.258
Before and after
Illustrations of what each repair changes on a typical chimney — not photos of a specific job.
Before
After
Before
After
Before
After
Four steps, each one on paper — so you always know what happens next.
Choose a genuine opening on the crew's calendar. Confirmation is immediate.
Liner, crown, cap, flashing and masonry examined in order — each finding photographed.
One document, plain numbers, covering only the work your chimney genuinely needs.
The repair is completed, then handed over with before-and-after photos of every item.
Occasional fires tend to be the worst kind for creosote. A cold flue, damp logs and a small smoky fire produce more deposit per hour than a hot, steady one.
Yes. Glaze burns hot once it catches, and CSIA guidance says a fireplace showing any of it should be cleaned now rather than at the next scheduled sweep.
It may loosen light deposits, but it does not remove anything. Someone still has to brush the loosened material out and look at the flue.
A $99 on-site inspection, a written quote before any work, and photos of every item we touch.
